The Alzone Pole mount bracket is cast from Aluminium. When combined with Alzone rail it is designed to carry up to two large solar panels (each a maximum of 1700mm x 1000mm) or a series of smaller sized modules.
The Alzone pole mount comes with an internal adaptor tube to suit 2 sizes of pipe, the pipe diameter being determined by the maximum height of the panels as well as the size and number of modules.
The tilt angle can be adjusted from 10 degrees through to 35 degrees.
Stainless steel mounting hardware and anodised (corrosion resistant) aluminium rail is provided when the pole mount is purchased as a pole mount kit (P/No. SPMPMKIT).
Panel clamps and clamp bolts are ordered separately to they suit the number of modules and the size of the solar modules frame.
The pole required to mount these is not included with the kit and can be source from your local metal supply company. It is recommended to use a heavy walled galvanised pipe with either 40NB (48.3mm O.D.) or 50NB (60.3mm O.D.). The 80NB ( 88.90mm O.D.) sized pipe if compliance is required.
The standard pole mount kit uses Alzone Standard Rail and Alzone Eco Rail in combination with other Alzone components.
Alzone Pole Mount Kits (P/No SPMPMKIT1600x850 & P/No SPMPMKIT1700x1000) are Wind Load Certified by an Engineer for use in Australian Wind region A, providing the concrete footing, module installed height and panel dimensions comply. Compliance is available only when system uses the 80NB pole.
POLE MOUNT KIT (aluminium) to suit up to 2 x 180W-300W panels with max dimensions up to 1600 x 850mm. Or a series of smaller panels which take up the same square meterage*
Suitable for use with 3 different pipe sizes 40NB, 50NB and 80NB
* End Clamps and Bolts supplied separately due to various panel frame depths. Please provide the depth of frame on the solar panel you will be using so we can ensure correct size clamps and bolts can be provided. (Cost of clamps and bolts included in kit price)