The Alzone Kliplok foot was designed to mount over the ridges of various Kliplok roof profiles.
Attachment is via roofing screws through the peak. Additional provision for screw attachment has been made on the support feet which sit in the valley (these can be used in difficult installations).
Slotted uprights allows solar module main rails to be mounted following the peaks or with addition of Alzone brackets, run at right angles to peaks.
Product is adaptable for raised (tilted) systems using Alzone brackets and legs.
Manufactured using Grade 6106 T6 aluminium and produced in a clear anodized finish the Kliplok foot foot provides a durable weather resistant solution on this type of sheeting.
Alzone isolation tape (SPMT3504-18) is recommended as a gasket isolator for this product.
Dimension W 110 mm x L 110 mm x H 135 mm
Compliance certificate to be verified 1/12/2010
Wind Zones A,B,C,D